Tractors, BullDozers

18 HP mini excavator with 2100 RPM engine, backfill blade and 16in. bucket. 9 RPM platform swing speed and a backhoe volume of nearly three cubic feet. Digging arm swings 50° to the right and 45° to the left. 30° gradeability ensure performance in hard-to-reach areas. Includes Limited 6 Month Parts/Labor Warranty.

Features + Specifications

Model: NE-1500
Maximum Transport Length: 139.5in. (3545mm
Minimum Length/Basic Length: 101in. (2565mm)/132.5in. (3365mm)
Chassis Width (outside track to outside track: 38.5in. (980mm)
Height from Canopy to Ground/from Engine Hood to Ground: 80in. (2027mm)/47in. (1190mm)
Maximum Height: 93in. (2360mm)
Minimum Ground Clearance: 8in. (206mm)
Length of Track Surface Contact: 41in. (1045mm)
Individual Track Width: <9in. (230mm)
Blade Height: 8.25in. (210mm)
Blade Width: 38.5in. (980mm)
Maximum Blade Cutting Depth: 6.7in. (170mm)
Maximum Blade Lift Height: 7.9in. (201mm)
Maximum Distance from Top of Blade to Ground: 16in. (411mm)
Height Between Platform and Ground: 462mm
Fuel Tank Capacity: 5.55 Gallons (21 Liters)
Radiator Capacity: .42 Gallons (1.6 Liters)
Hydraulic Circuit Capacity Tank + Piping/Tank-only: 12.4 Gallons (47 Liters)/9.7 Gallons (37 Liters)
Operating Weight: 2866 lbs. (1300 kg)
Travel Speed: 1.25 MPH (2 KM/H)
Maximum Traction Force: 2248 lbs. (10 KN)
Gradability: 30
Ground Pressure: 1.45 PSI (23 kpa)
Electrical System: 12 Volt negative ground
Hydraulic Pump Flow: 2 x 4.23 GPM (2 x 16 L/min)
Hydraulic Pump Flow: 1.6 GPM (6 L/min)
Working Equipment Circuit and Travel Circuit PSI: 2320 PSI (16 Mpa)
Swing Circuit Pressure: 1305 PSI (9 Mpa)
Dozer Circuit Pressure: 2175 PSI (15 Mpa)
Relief Pressure: 3045 PSI (21 Mpa)
Swing Motor Flow Rate: 184 ml/r
Travel Motor Flow Rate: 125 ml/r
Maximum Digging Depth with Crawler Level/with Crawler Tilted by Blade: 73in. (1850mm)/80in. (2040mm)
Maximum Digging Height/Dumping Height: 115in. (2930mm)/79.5in. (2020mm)
Maximum Reach/Reach @ Ground Level: 137in. (3480mm)/135in. (3430mm)
Maximum Reach @ Maximum Digging Height: 93in. (2366mm)
Maximum Digging Force @ Bucket Cylinder/@ Arm Cylinder: 2360 lbs. (10.5 Mpa)/1087 lbs. (7.5 Mpa)
Engine Model: L375
Engine Type: Vertical 4-stroke, water cooled
Engine Combustion Chamber Type: Vortex injection
Engine Number of Cylinders: 3
Engine Bore/Stroke: 2.953in. (75mm)/3.347in. (85mm)
Engine Compression Ratio: 22:1
Engine Total Displacement: 1.127 Liters
Engine Rated Output/Speed: 21 HP (15.6 kw)/2600 RPM
Engine Fuel Consumption @ Rated Output: 278.2 g/kw*hr