Item # ADP-10100
The pump is capable of pumping up to 25 feet from ground level by simply
connecting it to a 12 volt battery. Its reliable design is suitable for continuous sampling or purging of groundwater wells.
Simplify and Expedite Your Next Sampling Event!
The ADP-10100 can pass sand, small rocks and debris without getting clogged or damaging the pumps motors!
The ADP-10100 can run continuously without the need for a cool down! Unlike, the competition.
The ADP-10100 can also run dry for up to two hours without motor damage!
The ADP-10100 has a 400 hour motor life! That is twice as long as the competition!
The ADP-10100 has a sleek outside that minimizes well hang-ups.
The ADP-10100 is a very reliable and economical pump that provides a great bang for your buck!
The ADP-10100 comes ready for field use; with 35 feet of heavy duty wire, alligator battery clamps and it is shipped in its own box.
SPECS:
|
POWER CONSUMPTION: |
40-50 WATTS (MAX) |
|
VOLT RECOMMENDATION: |
12-15 At Source |
|
MAXIMUM AMP OUTPUT: |
4 AMPS |
|
MEASUREMENTS: |
LENGTH 5” / DIAMETER: 1.8” |
|
CONSTRUCTED: |
PVC PLASTIC & STAINLESS STEEL |
|
DISCHARGE OUTLET: |
3/8" ID x 1/2"ID (WITH BARBED TIP ENLARGER) |
|
SUPPLIED WITH: |
35 FEET OF HEAVY DUTY 12 GAUGE WIRE & BATTERY CLAMPS |
|
|
|
|
|
|
|
|
ADP-10100 Pump Chart |
|
PUMPING DEPTH (DTW) |
GALLONS PER MINUTE |
|
3 |
2.00 |
|
10 |
1.00 |
|
20 |
.35 |
|
25 |
.25 |
|
30 |
N/A |
|
|
|
|
|
|
