The ADP-10350 pump is capable of pumping up to 80 feet from ground level by simply connecting the pump to our revolutionary Econo-Booster, Power Booster I Controller, or our latest edition The Low Flow With Power Booster I Controller. All these Power Boosters do the same function, which is increase to 12 volts to a constant 19 volts. This in return, will make your next groundwater sampling event go much quicker when it comes to purging a well. And with our Low Flow With Power Booster I Controller, the field technician now has the ability to control the flow of water being discharged from the ADP-10350 thus, keeping up with EPA groundwater standards for Low Flow Sampling.
The ADP-10350 reliable design is suitable for continuous sampling or purging of groundwater wells. Simplify and Expedite Your Next Sampling Event!
TheADP-10350 can pass sand, small rocks and debris without getting clogged or damaging the pumps motors!
The ADP-10350 can run continuously without the need for a cool down! Unlike, the competition.
The ADP-10350 can also run dry for up to one hour without motor damage!
The ADP-10350 has a 400 hour motor life!
The ADP-10350 has a sleek outside that minimizes well hang-ups.
The ADP-10350 is a very reliable and economical pump that provides a great bang for your buck!
The ADP-10350 comes ready for field use; with 90 feet of heavy duty wire and Power Booster I adapter and it is shipped in its own box.
SPECS:
POWER CONSUMPTION:
170 WATTS (MAX)
VOLT RECOMMENDATION:
12-15 At Source
MAXIMUM AMP OUTPUT:
9 AMPS
MEASUREMENTS:
LENGTH 9.5” / DIAMETER: 1.8”
CONSTRUCTED:
PVC PLASTIC & STAINLESS STEEL
DISCHARGE OUTLET:
3/8" ID OR 1/2" ID POLY TUBING CAN BE USED
SUPPLIED WITH:
90 FEET OF HEAVY DUTY 12 GAUGE WIRE & THREE PRONG MALE ADAPTER
