Item # ADP-10400
The ADP-10400 pump is capable of pumping up to 100 feet from ground level by simply connecting the pump to our revolutionary Power Booster II Controller or The Low Flow With Power Booster II Controller.
The ADP-10400 reliable design is suitable for continuous sampling or purging of groundwater wells.
Simplify and Expedite Your Next Sampling Event!
The ADP-10400 can pass sand, small rocks and debris without getting clogged or damaging the pumps motors!
The ADP-10400 can run continuously without the need for a cool down! Unlike, the competition.
The ADP-10400 can also run dry for up to two hours without motor damage!
The ADP-10400 has a 400 hour motor life!
The ADP-10400 has a sleek outside that minimizes well hang-ups.
The ADP-10400 is a very reliable and economical pump that provides a great bang for your buck!
The ADP-10400 comes ready for field use; with 110 feet of heavy duty wire and Power Booster II adapter and it is shipped in its own box.
SPECS:
|
POWER CONSUMPTION: |
260 WATTS (MAX) |
|
VOLT RECOMMENDATION: |
12-15 At Source |
|
MAXIMUM AMP OUTPUT: |
11 AMPS |
|
MEASUREMENTS: |
LENGTH 14.5” / DIAMETER: 1.8” |
|
CONSTRUCTED: |
PVC PLASTIC & STAINLESS STEEL |
|
DISCHARGE OUTLET: |
3/8" ID OR 1/2" ID POLY TUBING CAN BE USED |
|
SUPPLIED WITH: |
110 FEET OF HEAVY DUTY 12 GAUGE WIRE & THREE PRONG MALE ADAPTER |
|
ADP-10400 Pump Chart |
|
PUMPING DEPTH (DTW) |
GALLONS PER MINUTE |
|
3 |
4.3 |
|
10 |
4.0 |
|
20 |
3.8 |
|
30 |
3.6 |
|
40 |
3.2 |
|
50 |
3.0 |
|
60 |
2.2 |
|
70 |
2.0 |
|
80 |
1.25 |
|
90 |
1.0 |
|
100 |
N/A |
