Item # ADP-10500
The ADP-10500 pump is capable of pumping up to 120 feet from ground level by simply connecting the pump to our revolutionary Power Booster II Controller, or The Low Flow With Power Booster II Controller.
The ADP-10500 reliable design is suitable for continuous sampling or purging of groundwater wells.
Simplify and Expedite Your Next Sampling Event!
The ADP-10500 can pass sand, small rocks and debris without getting clogged or damaging the pumps motors!
The ADP-10500 can run continuously without the need for a cool down! Unlike, the competition.
The ADP-10500 can also run dry for up to two hours without motor damage!
The ADP-10500 has a 400 hour motor life!
The ADP-10500 has a sleek outside that minimizes well hang-ups.
The ADP-10500 is a very reliable and economical pump that provides a great bang
for your buck!
The ADP-10500 comes ready for field use; with 130 feet of heavy duty wire and
Power Booster II adapter and it is shipped in its own box.
SPECS:
|
POWER CONSUMPTION: |
310 WATTS (MAX) |
|
VOLT RECOMMENDATION: |
12-15 At Source |
|
MAXIMUM AMP OUTPUT: |
13 AMPS |
|
MEASUREMENTS: |
LENGTH 19.5” / DIAMETER: 1.8” |
|
CONSTRUCTED: |
PVC PLASTIC & STAINLESS STEEL |
|
DISCHARGE OUTLET: |
3/8" OD OR 1/2" OD (WITH BARBED TIP ENLARGER) |
|
SUPPLIED WITH: |
130 FEET OF HEAVY DUTY 12 GAUGE WIRE & THREE PRONG MALE ADAPTER |
|
ADP-10500 Pump Chart |
|
PUMPING DEPTH (DTW) |
GALLONS PER MINUTE |
|
3 |
4.6 |
|
10 |
4.4 |
|
20 |
4.2 |
|
30 |
4.0 |
|
40 |
3.5 |
|
50 |
2.8 |
|
60 |
2.3 |
|
70 |
2.2 |
|
80 |
2.0 |
|
90 |
1.6 |
|
100 |
1.5 |
|
110 |
1.25 |
|
120 |
1.0 |
|
130 |
N/A |
